Use the drainage arrangement specified for the exact chair and site. Continuum’s Maestro Opus allows gravity drainage or an optional factory drain pump; its pipeless jet still needs building water and waste connections. Compare the outlet elevation, route, pump option and service access before ordering, then confirm the approved installation and backflow arrangement.
Does pipeless mean the chair has no plumbing?
Not necessarily. Identify what the word describes on the selected model. Continuum’s Maestro Opus installation manual, Revision B dated August 26, 2024, describes a NoPipe jet with no recirculation pipes. The same manual requires hot and cold supplies and a discharge connection. The jet design does not remove the building connections.
Belava’s Dorset manual V021926 separately describes plumbed and nonplumbed configurations. Its nonplumbed version uses a removable tub that staff empty; its plumbed arrangement uses a drain pump. Those are different operating and connection plans, not interchangeable definitions of pipeless.
Have the supplier identify the exact configuration on the order. Keep it with the equipment specification sheets, rather than designing from a showroom photograph.
When can the chair use gravity drainage?
The Maestro Opus manual offers gravity drainage or an optional factory-installed drain pump. Compare the chair outlet with the proposed receiving connection and the whole drainage route. A nearby wall drain does not establish that the outlet elevation and routing work for gravity.
Give the installer a drawing showing the finished floor, chair position, outlet and receiving drain. Record any proposed raised platform and the model’s installation dimensions. Have the supplier and plumbing designer determine the compatible layout before the chair arrives. Do not raise or alter the chair informally to reach a convenient pipe.
Keep the chair level, supported and secured as its manual requires. Continuum specifically requires floor anchoring and emphasizes it for gravity-drained installations. The installation also needs access for servicing; boxing in the connections can make a later repair needlessly difficult.
What changes when a drain pump is selected?
Use the factory option and connection instructions for that chair. The Maestro manual identifies different pump options with their own pumping capabilities and a particular hose arrangement. A pump described for one model does not establish the head, hose or fittings for another.
Compare the actual lift, routing and receiving connection with the selected pump’s instructions. Confirm who supplies the pump, hose, fittings and electrical work. A pump moves wastewater; it does not authorize its disposal into any available drain or eliminate other drainage requirements.
Belava’s Dorset instructions describe their own pump operation and warn against leaving it running unattended or overnight. Retain the actual operating instructions for staff instead of borrowing the routine from a neighboring chair.
Which approvals remain separate?
Confirm supply protection with the installer and serving authority. A manufacturer saying it supplies internal backflow protection is not proof that the complete salon installation satisfies every local requirement. Change-of-use backflow review addresses that separate decision.
The Maestro manual calls for licensed plumbing and electrical installation. Keep equipment work, building connections and electrical responsibilities clear. Salon hair-interceptor planning concerns shampoo-bowl waste, not permission to reuse that layout for a pedicure chair.
Resolve these connections within the tenant-improvement scope. Record the installed configuration and approved route after completion so future replacements begin with verified dimensions rather than another guess.